Skip to content

We fix what can be fixed and show you what can't: (559) 838-4169

Farmersville · Exeter · Ivanhoe · Visalia

(559) 838-4169

ServicesBumper Repair

Bumper Repair in Farmersville

Most bumper damage is a scuffed, cracked or pushed-in plastic cover, and a lot of it can be fixed. We look at the cover, the bar and the brackets behind it, then tell you straight whether to fix it or put on a new one.

Technician sanding a cracked gray bumper cover on a rolling stand in a body shop bay, with masking tape and a primer can on the stand's tray

Fixing the Bumper You Already Have

The bumper you see is a plastic cover. Behind it sit a foam or plastic energy absorber, a metal reinforcement bar, and a row of clips and brackets that hold it all in place. A parking lot tap or a low-speed bump usually hurts the cover first. That part is often repairable.

As an auto collision shop, we start with repair when the plastic is sound enough to hold. We can weld cracks, reshape dents with heat and rebuild broken mounting tabs. If the tear runs too long, the plastic is brittle, or the damage sits right where a sensor mounts, we will say so and price a new cover instead.

You get the reason either way. No guessing, and no new part just because it is quicker for us.

What Bumper Repair Includes

Taking the cover off

We pull the bumper cover so we can see the back side and everything behind it. A lot of damage hides there, like a cracked absorber or a bent bracket.

Plastic welding

Cracks and tears get welded from the back with filler rod that matches the plastic type stamped on the cover. Then we smooth the front so the repair does not show.

Heat reshaping

Pushed-in areas can often be warmed and worked back to shape. It is a good fix for a cover that is bent but not torn.

Tab and bracket rebuilds

Broken mounting tabs are why a lot of bumpers sag or gap. We rebuild tabs and swap out clips and brackets so the cover sits flush again.

Paint that matches

Plastic needs an adhesion promoter and flexible primer, or the paint will crack later. We are PPG certified, and we mix and blend the color so the bumper matches the fenders next to it.

Sensor checks

If your car has parking sensors or radar behind the bumper, we check that they are mounted right and working before you pick it up.

Customer and estimator review a printed estimate beside a gray SUV with a crushed front bumper and headlight on a concrete shop lot outside open repair bays

Signs Your Bumper Needs Work

A gap or sag at the corners
If the bumper hangs low or pulls away from the fender, a tab or bracket is likely broken. It can get worse at highway speed.
Cracks in the paint
Spider cracks or a white line in the paint often mean the plastic underneath is cracked too. Left alone, it can split further.
A dent that stayed
Plastic covers sometimes pop back out after a bump. When one stays pushed in, the absorber behind it may be crushed.
Sensor warnings
A parking sensor that beeps for no reason, or a driver-assist warning after a bump, can point to a sensor knocked out of place.
Scrapes down to bare plastic
Deep scrapes let sun and weather work on the plastic and the paint edge. Summer heat in the valley speeds that up, so it is worth fixing before it peels.

How a Bumper Job Goes

  1. 1

    Look it over with you

    You bring your car in and we walk around it together. We look at the cover and check the gaps and the lights.

  2. 2

    Check behind the cover

    Once we pull the cover, we can see the absorber, the reinforcement bar and the brackets. If we find more than we expected, we show you before we go further.

  3. 3

    Repair or replace call

    We tell you which way we would go and why. You get a written estimate that lists the parts and labor line by line.

  4. 4

    Fix, prime and paint

    We weld or reshape the plastic, rebuild tabs, then prime and paint. Color is blended into the next panels where needed.

  5. 5

    Refit and test

    The cover goes back on, we set the gaps, and we test any sensors. Then your car gets washed and it is ready.

What Changes the Price of Bumper Repair

No two bumpers cost the same to fix. The size and spot of the damage matter most, and so does what we find once the cover comes off. We put it all in writing before work starts.

Size and location of the damage
A short crack in a flat area is quick work. A long tear through a corner or around a light opening takes more time, and past a point a new cover costs less.
What is behind the cover
A crushed absorber, a bent reinforcement bar or broken brackets add parts and labor. We only know for sure after the cover is off.
Sensors and driver-assist parts
Parking sensors and radar add steps. Some cars need the radar checked or calibrated after the bumper is refit.
Paint and blending
Some colors, like pearls and tri-coats, take more steps to match. Blending into a fender or quarter panel adds time but keeps the color even.
New part choice
If a new cover is the better way to go, a factory part and an aftermarket part cost different amounts and fit differently. We explain both.

Bumper Repair Questions

Can a cracked bumper really be fixed, or does it need replacing?
Many cracked covers can be welded and refinished so the repair does not show. It depends on how long the crack is, where it runs and how many tabs are broken. If the plastic is brittle or the crack crosses a sensor mount, a new cover is usually the better call, and we will tell you that.
Will the repaired bumper match the rest of my car?
We mix the color to your car and blend it into the panels next to the bumper. Bumpers are plastic and the fenders are often metal, so they can look a little different in the light. Blending is how we keep that from showing.
My bumper looks fine but it got hit. Should I have it checked?
It is a good idea. Plastic covers can flex back while the absorber or brackets behind them break. If your car has sensors back there, a light bump can also knock them out of line.
How long will my car be at the shop?
A simple cover repair takes less time than a job with hidden damage or parts on order. Paint also needs time to cure before the bumper goes back on. We give you a time frame with the estimate and let you know if anything changes.
Can you work with my insurance on a bumper claim?
Yes, we can walk you through how an insurance claim works for bumper damage and send the estimate and photos your adjuster needs. The adjuster makes the coverage decision. Our Insurance Claims page covers more about how that goes.
Gray SUV parked on a wet concrete lot in front of a metal body shop with open repair bays, a paint booth, and a damaged sedan under an overcast sky

Bring Us the Bumper

Give us a ring and describe the damage in your own words. We will find a time for you to bring your car by, and once we have looked it over you will hear plainly whether we would fix the cover or fit a new one.