ServicesFrame Straightening
Frame Straightening in Farmersville
A hard hit can shift your car's frame even when the outside looks fine. We measure your vehicle against factory dimensions, pull it back into spec on a frame machine, and tell you straight when a damaged section should be replaced rather than pulled.

What frame straightening fixes
Every car is built to set measurements. The suspension mounts, the engine cradle and the door openings all sit at fixed points. When a collision pushes those points out of place, the car can pull, chew through tires, leave gaps at the doors or fail to protect you the way it should in the next crash.
Most cars today are unibody, so the body itself is the frame. Trucks and some SUVs still ride on a separate ladder frame. Both can be straightened. We anchor the vehicle, measure it, and use controlled pulls to bring it back to the numbers the maker published.
Our approach is repair first. If a rail is bent but not kinked or cracked, pulling it is usually the right fix. If the metal is folded or torn, or the maker calls for a new part after damage, we say so and explain why ahead of any work.

What the work includes
- 01
Measuring first
We check key points under the car against factory specs. That shows how far each point moved and in which direction. It also tells us if damage traveled past the spot that got hit.
- 02
Anchoring and controlled pulls
The vehicle is clamped to a frame machine so it cannot shift. We pull in stages and re-measure as we go. Slow pulls let the metal move back without new stress.
- 03
Section replacement when needed
Some damage should not be pulled. Kinked rails, cracks and some high-strength steel parts get cut out, and new pieces are welded in at the points the maker allows. We show you the damage and the reason.
- 04
Final measurement
Once the frame is back in spec, we measure again and keep the numbers with your file. You can ask to see them.
- 05
Panel and paint work after
Frame damage usually comes with body damage. We handle the panels and the refinish as part of the same job, and our paint work is done as a PPG certified shop.
- 06
Alignment check
With the structure back where it belongs, the wheels can be aligned properly. We confirm the car tracks straight when it goes back to you.
Questions about Frame Straightening?
Call(559) 838-4169Signs your car may need frame work
It pulls after a crash
If the car drifts to one side and an alignment does not fix it, the mounting points may have moved. That is a structure problem, not just a steering one.
Panels that no longer meet
The hood sits higher on one side, the trunk lid rubs, or a door suddenly takes extra force to shut. Any of these can mean the opening around it has shifted.
Tires wearing unevenly
Fast wear on one edge of a tire, soon after a collision, can mean the wheels are no longer sitting where they were designed to.
Wrinkles under the car
Creases in the floor pan, rails or the inner fender are a strong sign the hit went deeper than the bumper.
New noises or a loose feel
Creaks, rattles or a sloppy feel over bumps can mean parts are under strain from a frame that is out of shape.
How a frame job runs at our shop
- 1
Bring it in for a look
You drop the car at our shop. We look it over, put it up and take initial measurements so we know what we are dealing with.
- 2
Walk through the estimate
We go over what moved, what can be pulled and whether any section needs to come out. The estimate lists each part and step so nothing is hidden. If insurance is involved, we can explain how the insurance claim process works.
- 3
Straighten and measure
The car goes on the frame machine. We pull, measure, and pull again until it is back in spec. If we find hidden damage once panels come off, we call you first and wait for your okay.
- 4
Body, paint and alignment
Panels are repaired or replaced, painted and fitted. Then we align the wheels and road test the car.
- 5
Pick up and review
When you come back, we show you the before and after numbers and answer any questions.
What moves the cost of frame straightening
There is no flat price for frame work, because no two hits bend metal the same way. The cost comes down to how far the structure moved and what it takes to bring it back safely. We put it all in a written estimate before work begins.
- How much it moved
- A rail pushed a short distance in one direction takes fewer pulls than a car that is twisted or swayed across its length.
- Pull or replace
- Straightening usually costs less than a new section. When one is needed, the part and the labor to cut and weld it in add to the bill.
- Unibody or full frame
- Unibody cars often need more panels removed to reach the damage. Body-on-frame trucks can be more direct but may involve heavier parts.
- Related damage
- Suspension parts, sensors, panels and paint affected by the same hit all show up on the estimate.
Frame straightening questions
Is a straightened frame as safe as it was before?
When it is measured back to factory specs and the right parts are replaced, yes. That is why we measure at the start, during the pulls and at the end. If a section cannot be safely pulled, we put in a new one instead of forcing it.
How do I know if my frame is actually bent?
You often can't tell by looking. Pulling, uneven door gaps and odd tire wear are clues, but measuring is the only sure answer. We check it when you bring the car in.
Does frame damage mean my car is totaled?
Not always. Many cars with frame damage are repaired every day. Whether an insurer totals a car depends on the repair cost compared to the car's value, and that is their call. We give an honest estimate of what the repair takes.
How long will my car be at the shop?
That depends on how far the structure moved, whether parts have to be ordered, and the amount of panel and refinish work that comes after. Once the measurements are done we can give you a realistic timeline. If something changes it, we call and tell you.
Will a frame repair show up on my car's history?
If an insurance claim was filed or a report was made, it may. Either way, keep the repair paperwork and the final measurements. They show the work was done to spec, which helps if you sell the car later.

Think the frame took a hit?
Bring your car in and we will measure it and tell you what we find. If pulling it back is the sensible fix, that is what we will recommend.